- 70 -5. Job Macro (for MB471/MB471w/MB491/MB491+/MB491+LP/ES4191 MFP/MPS4200mb/MPS4700mb Only)This chapter explains the job macro function. JOB MACROThis section explains how to make macros for jobs that you do frequently.You can register macros for frequently used function settings for copying, scanning, faxing, Internetfaxing, and printing in the machine and create shortcuts. This "Job Macro" allows you to performoperations more simply and quickly.You can create a macro for settings on the following functions:Note If the user authentication is enabled, log into the machine before following the procedures below.Memo You can register up to 16 macros.Creating a MacroYou can create a macros for settings frequentlyused. Registering a new macro1 Specify the settings you want to registerat the operator panel.2 Press the <JOB MACRO> key to openthe job macro menu.3 Press the to select a registerednumber and then press .4 Check the settings and then press .Press the to scroll the setting list on the screen.5 Enter a title for the new macro.6 Select [Enter] and then press .7 On the confirmation screen, press theor to select [Yes] and then press . Overwriting1 Specify the settings you want to registerat the operator panel.2 Press the <JOB MACRO> key to openthe job macro menu.3 Press the to select an entry numberfor a new macro and then press .4 Press the to select [Register] andthen press .5 Check the settings and then press .Press the to scroll the setting list on the screen.6 On the confirmation screen, press theor to select [Yes] and then press .7 Enter a title for the new macro.8 Select [Enter] and then press . Copying Printing from USB Memory Scanning to e-mail Scanning to network PC Scanning to USB Memory Fax Sending Internet Fax Sending Scanning to Fax ServerOKOKOKOKOKOKOKOKOK
