Using Drivers and Software- 39 -Scanning3 Using Drivers and SoftwareThis section explains how to use the scanner driver and utilities. They allow you to scan documents andchange settings easily on your computer.Using TWAIN DriverMemo The explanations in this section use PaperPort in Windowsand Adobe Photoshop CS3 in Mac OS X as an example. In this section, procedures using Scan To Remote PC withUSB connection are described. For how to connect to thenetwork and start to scan by Scan To Local PC, refer to theUser's Manual Basic.Note The Twain driver for Mac OS X supports the Mac OS X 10.4to 10.7. To use this function, applications supporting TWAIN(PaperPort or Adobe Photoshop CS3, etc.) should beinstalled in your computer.Reference For details on how to start a scan job, refer to the User'sManual Basic. For details on how to install PaperPort, refer to "InstallingUtilities" P. 106.Starting a Scan Job (for Windows)1 Place your document with text face up in theADF or face down on the document glass.When the device's Scan Mode settings are in"Simple Mode", please proceed to Step 4.Otherwise, please carry out step 2 and 3.2 Press the <SCAN> key.3 Press the to select [Remote PC] andthen press .4 Start PaperPort on your computer.5 Click [Select] and then select thescanner driver of the machine.A window appears.6 Click the [Scan].7 Click the scan buttons.The scan job starts.8 Click [Quit].9 When there is no continued page or theback side is not scanned, click [Quit].Memo The following five buttons are registered as default settings.Scan PhotographScan MagazineScan for OCRScan for InternetCustomizeChanging SettingsYou can adjust how the document is scanned bychanging the driver setting.The following explains the setting items. Simple ModeYou can change the settings of five registeredbuttons.1 Follow the procedure for "Starting a ScanJob (for Windows)" through step 6.2 Select [Simple] from [Mode].3 Click [Settings].A window appears.4 Click the scan button to change thesettings.5 Click [OK].6 If you start a scan job, click the scanbutton.If you want to finish the setting, click [Quit].OK
