Changing Network Settings From the Web Page- 164 -9 Enter attribute names to be searched foras the user name in [User Name].Be sure to specify a value for [Name 1].10 Enter an e-mail address to be searchedfor in [Mail Address].11 If necessary, specify a search conditionin [Additional Filters].12 Select the authentication method youwant in [Method].Note When you select [Anonymous] or [Simple], userauthentication using LDAP fails. You need to select[Digest-MD5] or [Secure Protocol] if you configurethe LDAP server for user authentication.Memo When you select [Digest-MD5], you need toconfigure the DNS server setting. When you select [Secure Protocol], you need toconfigure the DNS server and the secure protocolserver settings.13 If you do not select [Anonymous] instep 12, specify the user ID andpassword to log in to the LDAP server.14 Select the encryption method in[Encryption].15 Click [Send].The network card reboots to enable the newsettings.Configuring Secure ProtocolsAuthentication using the Kerberos server isavailable when you access the LDAP server. Inorder to use the secure protocol, be sure tocomplete the SNTP and DNS server settings.1 Access the machine's web page and login as the administrator.2 Select [Admin Setup].3 Select [Network Manager]>[SecureProtocol Server Setting].4 Enter a realm name in [Domain Name].5 Click [Send].The network card reboots to enable the newsettings.Printing Without Printer Driver(Direct Print)Printing PDF FilesYou can print PDF files without installing theprinter driver. Specify the file you want to printon the web page and sent it to the machine.Memo Additional RAM memory may be necessary depending onthe PDF file. Printing may not be correct depending on the PDF file.When printing is not correct, open the file with AdobeReader and then print.1 Access the machine's web page.2 Click [Direct Print].3 Select [Web Printing].4 Follow the on-screen instructions tospecify detailed settings.5 Check the settings and then click [OK].The data is sent to the machine and the printing isstarted.Configuring Server to Print FilesAttached to E-mailsYou can print a file that the machine receives asan attachment to an e-mail.Memo Up to 10 files can be printed. The maximum size for eachfile is 8 MB. PDF, JPEG, and TIFF files can be printed. Additional RAM memory may be necessary depending onthe PDF file. Printing may not be correct depending on the PDF file.When printing is not correct, open the file with AdobeReader and then print. Configuration for POP1 Access the machine's web page and login as the administrator.2 Select [Admin Setup].3 Select [Network Manager]>[E-mail]>[Receive Settings].4 Select [POP3] and then click [ToSTEP2].
