Useful Operations for Printing From a Computer- 66 -11 Press the to select [Stored Job] andthen press .12 Enter the password you set in step 6 inthe [Password] box and then pressto start a job searching.- Press the <CLEAR> key if you enter a wrongnumber.- Press the <STOP> key if you want to stop the jobsearch.13 Make sure [Print] is selected and thenpress .If you select [Delete], you can delete the printjob.14 Enter the number of copies and thenpress .Reference You can delete stored print data with the ConfigurationTool. The print job stored on the SD memory card remains afterprinting.Saving the Driver SettingsYou can save the printer driver settings.Note This function is not available with the Windows PS printerdriver, the Mac OS X printer driver and the Fax driver.For Windows PCL/PCL XPS PrinterDriver Saving the Settings1 Click [Start] and select [Devices andPrinters].2 Right-click the OKI MB491 icon and thenselect [Printing preferences]>[OKIMB491(*)].*Select the type of driver you want to use.3 Configure the print settings to save.4 On the [Setup] tab, click [Save] at[Driver Settings].5 Specify a name for the setting to saveand then click [OK].If you select the [Include media settings] checkbox, the paper configuration on the [Setup] tab isalso saved.6 Click [OK] to close the print setup dialogbox.Memo Up to 14 forms can be stored. Using the Saved Settings1 Open the file you want to print.2 From the [File] menu, select [Print].3 Click [Preferences].4 On the [Setup] tab, select a setting youwant to use from [Driver Settings].5 Start printing.Changing the Driver's DefaultSettingsYou can use print settings often used as theprinter driver's default settings.For Windows Printer Driver1 Click [Start] and select [Devices andPrinters].2 Right-click the OKI MB491 icon and thenselect [Printing preferences]>[OKIMB491(*)].*Select the type of driver you want to use.3 Configure the print settings to use as thedriver's default setting.4 Click [OK].For Mac OS X PCL/PS Printer Driver1 Open a file.2 From the [File] menu, select [Print].3 Configure the print settings to use as thedriver's default settings.4 Select [Save Current Settings asPreset...] from [Presets]. (For Mac OSX 10.7 to 10.8)Select [Save As] from [Presets]. (ForMac OS X 10.4 to 10.6)5 Enter a name for the settings and click[OK].OKOKOKOK
