Sending a fax at a scheduled time1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazineclippings) into the ADF. Place these items on the scanner glass.2 If you are loading a document into the ADF, then adjust the paper guides.3 On the home screen, touch Fax.4 Enter the fax number using the numbers on the touch screen or keypad.5 Touch Options.6 Touch Advanced Options.7 Touch Delayed Send.Note: If Fax Mode is set to Fax Server, the Delayed Send button will not appear. Faxes waiting for transmissionare listed in the Fax Queue.8 Touch the arrows to adjust the time the fax will be transmitted.The time is increased or decreased in increments of 30 minutes. If the current time is shown, the left arrow isunavailable.9 Touch Done.10 Touch Fax it.Note: The document is scanned and then faxed at the scheduled time.Viewing a fax log1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP addressin the TCP/IP section.2 Click Settings.3 Click Reports.4 Click Fax Job Log or Fax Call Log.Blocking junk faxes1 Type the printer IP address into the address field of your Web browser.Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP addressin the TCP/IP section.2 Click Settings.3 Click Fax Settings.4 Click Analog Fax Setup.Faxing116
