Menu item DescriptionEnhance Fine LinesOnOffEnables a print mode preferable for files such as architectural drawings, maps, electricalcircuit diagrams, and flow chartsNotes:• Off is the factory default setting.• To set Enhance Fine Lines using the Embedded Web Server, type the networkprinter IP address in a browser window.Gray CorrectionAutoOffAdjusts the gray value of printed outputNote: Auto is the factory default setting.Brightness-6 to +6Adjusts or darkens printed output and conserves tonerNotes:• 0 is the factory default setting.• A negative value will darken text, images, and graphics. A positive value willlighten them and conserve toner.Contrast0–5Adjusts the degree of difference between levels of gray in printed outputNotes:• 0 is the factory default setting.• Higher settings show more difference between levels of gray.Utilities menuMenu item DescriptionRemove Held JobsConfidentialHeldNot RestoredAllRemoves confidential and held jobs from the printer hard diskNotes:• Selecting a setting affects only print jobs that are resident in the printer.Bookmarks, jobs on flash drives, and other types of held jobs are not affected.• Selecting Not Restored removes all Print and Hold jobs that were not restoredfrom the disk.Format FlashYesNoFormats the flash memory. Flash memory refers to the memory added by installinga flash memory option card in the printer.Warning—Potential Damage: Do not turn off the printer while the flash memoryis formatting.Notes:• A flash memory option card must be installed in the printer and operatingproperly for this menu item to be available. The flash memory option card mustnot be Read/Write or Write protected.• Selecting Yes deletes all data stored in flash memory.• No cancels the format request.Understanding printer menus222
