Menu item DescriptionN-up BorderNoneSolidPrints a border around each page image when using N-up (pages-sides)Note: None is the factory default setting.Staple JobOffOnSpecifies whether print jobs are stapledNotes:• This menu item is available only when the StapleSmart Finisher is installed.• Off is the factory default setting. Print jobs are not stapled.• Envelopes are not stapled.Offset PagesOffBetween JobsBetween CopiesStacks copies or print jobs into staggered sets in an output binNotes:• This menu item appears only when the StapleSmart Finisher is installed.• Off is the factory default setting. No pages are offset during the print job.• Between Jobs offsets each print job.• Between Copies offsets each copy of a print job.Quality menuMenu item DescriptionPrint Resolution300 dpi600 dpi1200 dpi1200 Image Q2400 Image QSpecifies the printed output resolutionNote: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.Pixel BoostOffFontsHorizontallyVerticallyBoth DirectionsEnhances the printed quality of small fonts and graphicsNotes:• Off is the factory default setting.• Fonts applies this setting only to text.• Horizontally darkens horizontal lines of text and images.• Vertically darkens vertical lines of text and images.• Both Directions darkens horizontal and vertical lines on text and images.Toner Darkness1–10Lightens or darkens the printed outputNotes:• 8 is the factory default setting.• Selecting a smaller number can help conserve toner.Understanding printer menus221
