Using the printer control panel1 Make sure the printer is on and Ready appears.2 On the home screen, touch .3 Touch Settings.4 Touch General Settings.5 Touch the down arrow until Timeouts appears.6 Touch Timeouts.7 Touch the left or right arrow next to Power Saver Mode to decrease or increase the time the printer waitsbefore entering Power Saver mode.The settings available range from 1–240 minutes.8 Touch Submit.9 Touch .Restoring the factory default settingsIf you want to retain a list of the current menu settings for reference, then print a menu settings page before yourestore the factory default settings. For more information, see “Printing a menu settings page” on page 44.Warning—Potential Damage: Restoring factory defaults returns most printer settings to the original factory defaultsetting. Exceptions include the display language, custom sizes and messages, and Network/Port menu settings. Alldownloads stored in RAM are deleted. Downloads stored in flash memory or on a printer hard disk are not affected.1 Make sure the printer is on and Ready appears.2 On the home screen, touch .3 Touch Settings.4 Touch General Settings.5 Touch the down arrow until Factory Defaults appears.6 Touch the left or right arrow until Restore Now appears.7 Touch Submit.8 Touch .Administrative support257
