Oki MC860 User Manual

Also see for MC860 MFP: Security guide Easy setup guide Maintenance manual User guide Software guide

Contents

Installing upgrades > 132INSTALLING UPGRADESThis section explains how to install optional equipment into your MFP. This includes:> additional RAM memory> paper tray(s) and storage cabinet assemblyO RDER CODESM EMORY UPGRADEThis section explains how to install additional RAM memory into your MFP as a memoryupgrade.The model comes equipped with 512MB (256MB + 256MB) of main memory. This can beupgraded with an additional memory board containing 512MB, giving a total memorycapacity of 768MB maximum.1. Switch the MFP off and disconnect the power cable.2. Pull open the access panel on the side of the machine.3. Carefully remove the new memory board from its wrapping. Try to handle the boardonly by its short edges, avoiding contact with any metal parts as far as possible. Inparticular, avoid touching the edge connector.Notice that the memory board has a small cutout in the edge connector, which iscloser to one end than the other.4. Identify the RAM expansion slot in the machine.OPTION ORDER CODERAM memory; 512Mb 01182902Configuration A (Model No. N34234A):One paper tray and tall storage cabinet44020403Configuration B (Model No. N34235A):Two paper trays and short storage cabinet44020503NOTEThe maximum capacity of your machine is 768MB, therefore the existing256MB board must be removed from the RAM expansion slot before the newmemory upgrade board can be fitted.