Oki MC860 User Manual

Also see for MC860 MFP: Security guide Easy setup guide Maintenance manual User guide Software guide

Contents

Configuring your machine... > 53NetworkMenu (cont.)NetworkSetup(cont.)Subnet Mask xxx.xxx.xxx.xxx Current assigned subnet mask. Tochange, proceed as above.Display condition: TCP/IP protocolmust be enabled.GatewayAddressxxx.xxx.xxx.xxx Current assigned gatewayaddress. To change, proceed asabove.Display condition: TCP/IP protocolmust be enabled.Web Disable, Enable Enables or disables web config.facility.Display condition: TCP/IP protocolmust be enabled.Telnet Disable, Enable Enables or disables Telnet config.facility.Display condition: TCP/IP protocolmust be enabled.FTP Disable, Enable Enables or disables communicationvia FTP.Display condition: TCP/IP protocolmust be enabled.IPSec Disable, Enable Enable via the web page orConfiguration Tool.SNMP Disable, Enable Enables or disables SNMP of FTP(TCP/IP or NetWare).Display condition: TCP/IP protocolmust be enabled.Network Scale Small, Normal Normal: Can work effectively evenwhen connected to a HUB that hasa spanning tree feature. However,printer start up time gets longerwhen computers are connected totwo or three small LANs.Small: Computers can cover fromtwo or three small LANs to a largeLAN, but it may not workeffectively when it is connected toa HUB with a spanning treefeature.HUB LinkSettingAuto Negotiate,100BASE-TX FULL,100BASE-TX HALF,10BASE-T FULL,10BASE-T HALFSets the hub linking method.Network PS-ProtocolASCII, RAW Select PostScript data format forthe network port.Factory Defaults Execute Select Yes to reload the settingspresent when the unit was setupby the manufacturer.Mail ServerSetupSMTP server Set the host name for the SMTPserver.SMTP Port 00000 ~ 00025 ~65535Set the port number.FEATURE OPTION DESCRIPTION