Oki MC860 User Manual

Also see for MC860 MFP: Security guide Easy setup guide Maintenance manual User guide Software guide

Contents

Configuring your machine... > 52Print Setup(cont.)EPSON FXSetup(cont.)Form Length 11 Inch, 11.7 Inch,12 InchSpecifies the length of paper.TOF Position 0.0 Inch - 1.0 Inch Specifies the distance of print fromthe top edge of the paper.Left Margin 0.0 Inch - 1.0 Inch Specifies the distance of print fromthe left hand edge of the paper.Fit to Letter Disable, Enable Sets the printing mode that can fitprint data, equivalent to 11 inches(66 lines), in the LETTER-sizeprintable area.Text Height Same, Diff Sets the height of a character.SAME: Regardless of CPI, sameheightDIFF: As CPI, character heightsvary.Cont PaperModeOFF, ON If you have multiple feed traysinstalled in which the media is thesame size and type you can enablecontinuous paper mode. When onetray runs out of paper, the MFP willswitch to another tray.NetworkMenuNetworkSetupTCP/IP Disable, Enable Enables or disables this networkprotocol.IP Version IPv4, IPv4 + IPv6 Set up the IP version.Display condition: TCP/IP protocolmust be enabled.NetBEUI Disable, Enable Enables or disables this networkprotocol.NetBIOS overTCPDisable, Enable Enables or disables this networkprotocol.Display condition: TCP/IP protocolmust be enabled.NetWare Disable, Enable Enables or disables this networkprotocol.EtherTalk Disable, Enable Enables or disables this networkprotocol.Frame Type Auto, 802.2, 802.3,ETHERNET II, SNAPSelects the Ethernet MAC layerframe type.Display condition: Netware mustbe enabled.IP Address Set Manual, Auto Specifies whether IP addressallocation is automatic (DHCP) ormanually assigned.Display condition: TCP/IP protocolmust be enabled.IPv4 address xxx.xxx.xxx.xxx Current assigned IP address.To change, enter the address usingthe numerical keypad. Press Enterto register new address.Display condition: TCP/IP protocolmust be enabled.FEATURE OPTION DESCRIPTION