Oki MC860 User Manual

Also see for MC860 MFP: Security guide Easy setup guide Maintenance manual User guide Software guide

Contents

Getting started > 23MULTI PURPOSE TRAYThe multi purpose tray can handle the same media sizes as the cassette trays but inweights up to 200g/m² (Ultra heavy). For very heavy paper stock, use the face up (rear)paper stacker. This ensures that the paper path through the MFP is almost straight.The multi purpose tray can feed paper widths as small as 100mm and lengths up to1200mm (banner printing).For paper lengths exceeding 431.8mm use paper stock up to 128g/m² and the face up(rear) paper stacker.Use the multi purpose tray for printing on envelopes and transparencies. Up to 50 sheetsof transparencies or 10 envelopes can be loaded at one time, subject to a maximumstacking depth of 10mm.Watermarked, headed paper or transparencies should be loaded print side up and top edgeinto the MFP. Do not use the duplex (two-sided printing) function.FACE DOWN STACKERThe face down stacker on the top of the MFP can hold up to 250 sheets of 80g/m² standardpaper and can handle paper stocks up to 176g/m². Pages printed in reading order (page 1first) will be sorted in reading order (last page on top, facing down).FACE UP STACKERThe face up stacker at the rear of the MFP should be opened and the tray extension pulledout when required for use. In this condition paper will exit via this path, regardless of driversettings.The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handlestocks up to 200g/m².Always use this stacker and the multi purpose feeder for paper stocks heavier than176g/m².DUPLEX UNITThe duplex unit provides automatic two-sided printing on the same range of paper sizes astray 2 (i.e. all cassette sizes except A6), using paper stocks from 64-105g/m².