Appendix A - Statutory User Information (UK only)101EnglishAppendix A - Statutory UserInformation (UK only)This apparatus is approved for connection to telecommunications systemsspecified in the instructions for use subject to the conditions set out inthem. The BABT approval number is listed on the inside front cover of thismanual.This apparatus has been approved for the use of the following facilities:• manual call initiation• operation in the absence of proceed indication• auto answer• modem• series connection• simple telephoneAny other usage will invalidate the approval of the apparatus if as a resultit ceases to conform to the standards against which the approval wasgranted.Interconnection circuits should be such that this equipment continues tocomply with the requirements of 4.2 of EN 41003 for TNV circuits and 2.3of EN60950 for SELV circuits after making connections between circuits.Interconnection points ‘Line/TEL1/TEL2’ are for connection to TNVcircuits, and the ‘Power Inlet Socket’ is for connection to a 220-240VAC,50/60 Hz supply.The apparatus has been approved for connection to the public switchedtelephone network provided by British Telecommunications Plc, KingstonCommunications Plc, or Mercury Communications Ltd.The apparatus may be connected to any direct PSTN exchange line exceptas an extension to a pay phone. The exchange line must provide facilitiesfor either loop-disconnect or multi-frequency (MF) dialling.In order to prevent the misdirection of calls and network interference,please ensure that all manually programmed telephone numbers arecorrectly entered.
