58User’s Guidelocation, select the location in the same way, but press the NO keyat Step 5 to delete it from your transmission.9. When all of your selections are correct, press the Start key. Your faxmachine will scan the documents into memory and begintransmitting the message.Delayed sending of faxesThe delayed transmission feature allows you to send documents at aspecified date and time, and frees you from the need to manually start thetransmission. You can program a delayed transmission to occur at any timeon the day of your transmission, or at any time over the next three days.You can send a delayed fax either from the document feeder or frommemory. Refer to the table below to decide which method you want to use.Sending delayed fax from document feeder1. Load your documents.2. Press the Select Function key.3. Press the 1/Delayed TX One Touch key. The display showsDELAYED TX and today’s date.4. If transmission is to occur today press YES key and go to step 7. Iftransmission is to occur at a later date press the NO key.5. Using the numeric keypad, enter the date on which you wish thetransmission to begin.6. Press the YES key. The display shows PRG. START TIME.7. Using the numeric keypad, enter the time on which you wish thetransmission to begin.Note:Enter the time using a 24-hour clock, i.e., 8:00 a.m. would beentered as 08:00 and 8:00 p.m. would be entered as 20:00.Delayed TX Features & Limitations From Feeder From MemoryNumber of locations One MultipleNumber of delayed faxes in your fax machine at any onetimeOne Up to twentyFax machine can be used for other transmissions while adelayed fax is waiting to be sent?No Yes
