Advanced Operations59English8. Press the YES key and the display shows BROADCAST/MEMORY T/X or FEEDER TX depending on the User Function18 setting.9. If display shows FEEDER TX go to step 10. If display showsBROADCAST/MEMORY TX press the NO key. The displayshows FEEDER TX.10. Select a location. Refer to the instructions below.11. Press the Start key. Your fax machine then waits for the time anddate you have set before sending the fax.Sending delayed fax from memory1. Load your documents.2. Press the Select Function key.3. Press the 1/Delayed TX One Touch key. The display showsDELAYED TX and today’s date.4. If transmission is to occur today press YES key and go to step 7. Iftransmission is to occur at a later date press the NO key.5. Using the numeric keypad, enter the date on which you wish thetransmission to begin.6. Press the YES key. The display shows PRG. START TIME.7. Using the numeric keypad, enter the time on which you wish thetransmission to begin.Note:Enter the time using a 24-hour clock, i.e., 8:00 a.m. would beentered as 08:00 and 8:00 p.m. would be entered as 20:00.8. Press the YES key and the display shows BROADCAST/MEMORY T/X or FEEDER TX depending on the User Function18 setting.9. If display shows BROADCAST/MEMORY TX go to step 10. Ifdisplay shows FEEDER TX press the NO key. The display willshow BROADCAST/MEMORY TX.To Select Using Do ThisOne Touch key Press the One Touch key. Lift the main One Touchkeypad to access One Touch keys 16 to 30.Auto Dial number Press the Auto Dial key, then enter the two digitAuto Dial number on the numeric keypad.A number dialled on the numeric keypad Dial as you would on a normal telephone.
