EnglishChapter 2 - Installation5Resetting the Network cardTurn the printer power OFF, then turn it ON again,pressing and holding down the TEST button on thenetwork card until ON-LINE appears in the messagewindow.After about 10 seconds, the printer will re-bootautomatically.When the printer goes back on line, the Network cardhas been reset to the factory default settings.Printing the Network card settingsPress the TEST button for at least 1 second when theprinter is on line. The Network cards’ settings will beprinted."TEST" button3100euGB.book Page 5 Friday, March 16, 2001 1:18 PM
