EnglishChapter 5 - Utilities Installation69Network] tag. If they are not found, add them inthe following procedure:(a) Click on [Add...] in the [Set Network] tagand open [Add network configurationfile(s)].(b) Select [Protocol] in the [Networkconfiguration file to be installed:], then clickon [Add...] and open [Select networkprotocol] window.(c) Select [Microsoft] in the [Manufacturers],then [TCP/IP] in the [Network protocols:]and click on [OK].(d) Make sure that TCP/IP has been added to[Current network configuration] of [SetNetwork] tag.3. Select TCP/IP from the [Current networkconfiguration:] list, open [Properties] and set thefollowing items:(a) IP Address(b) Subnet mask(c) Gateway(d) DNSNote: If you do not know the values to set, consultthe network administrator.4. Restart the computer after completing the settingof TCP/IP.Printer driver setup1. Double-click on [Printers], then double-click on[Add Printer].2. [Add Printer Wizard] is displayed. Insert theprinter driver CD-ROM into the CD drive.3. Follow the on-screen instructions and install theprinter driver selecting the printer as defaultprinter and local printer.LPR installation and uninstallInstallation1. Insert the software CD-ROM into the CD-ROMdrive.2. Click on [Start] - [Run].3. Type D:\OKILPR\SETUP (where D:\ is the driveletter of your CD-ROM drive).4. Follow the on-screen installation instructions.3100euGB.book Page 69 Friday, March 16, 2001 1:18 PM
