44OkiLAN 3100e Network Cardsetup, in some cases, “Security Information”dialogue is displayed every time the size ischanged. If this occurs, uncheck the check box of“Show This Alert Next Time” of “SecurityInformation” dialogue.TelnetYou can set up this network card using the Telnet in thenetwork environment where the TCP/IP protocol isused.Note 1: You cannot make the NetWare server sides e t t i n g s w i t h T e l n e t . P l e a s e u s ePCONSOLE, etc., for that.Note 2: Telnet and Web cannot be connected at thesame time.Note 3: Maximum of two Telnet sessions can beconnected.Items that can be setThe following items can be set in Telnet. To change thesettings, you must log in from [root] using theadministrator’s account.Category Item Meaning RangeProtocolTCP/IP TCP/IP Enable/Disable Enable/DisableNetWare NetWare Enable/Disable Enable/DisableEtherTalk EtherTalk Enable/Disable Enable/DisableNetBEUI NetBEUI Enable/Disable Enable/DisableIPIP BYTE 1-4 IP Address 0 - 255SM BYTE 1-4 Subnet Mask 0 - 255GW BYTE 1-4 Default Gateway 0 - 255NetWare Common NetWare Print Mode Select operation in print mode Auto/Q-Server/R-PrinterQ-Server NetWare Print Server Name Set own print server name 1 - 48 characters, default OKIDATA. (MAC address last6 characters).Polling Rate Polling cycle 1 - 60 sec, default 5 sec3100euGB.book Page 44 Friday, March 16, 2001 1:18 PM