Oki OKILAN 3100e User Manual
                                                                                                        | |
Contents
|
48OkiLAN 3100e Network CardType “y” to ENABLE DHCPWill you use RARP? (y/n): n [Enter]Type “y” to ENABLE RARPIP Addr (OLD) 192.36.253.96(NEW) 192.36.253.100 [Enter]SUBNETMASK (OLD) 255.255.255.0(NEW) [Enter]DEFAULTGATEWAY (OLD) 192.36.253.254(NEW) [Enter]Are you re-setting (y/n): n [Enter]Type “y” to resetOkiPage> logout (or exit or quit) [Enter]If you wish to set other protocols now, enter anappropriate command without logging out.You can change TCP/IP address with the setaddress command, too, in addition to the setprotocol command.OkiPage> set address [Enter]IP Addr (OLD) 192.36.253.96(NEW) 192.36.253.100 [Enter]SUBNETMASK (OLD) 255.255.255.0(NEW) [Enter]DEFAULTGATEWAY (OLD) 192.36.253.254(NEW) [Enter]The set address command can specify the item tochange.OkiPage> set address ip (or “mask”,”gateway”) [Enter]Setting NetWare environmentIn Telnet, you set the NetWare environment of thisnetwork card. For setting the NetWare server, usePCONSOLE, NetWare Admin istrator Utility,OkiView, etc.Display/set the NetWare environment.Display Command to use: show protocolor shproTarget account: general users andadministrator userSet Command to use: set protocol orseproTarget account: administrator userThe NetWare environment has the following items tobe set:NetWare common:NetWare Mode:Set in which of the modes, Queue Server Mode orRemote Printer Mode, this network card is to be used.In AUTO Mode, the Queue Server Mode and theRemote Printer Mode are automatically switched.3100euGB.book Page 48 Friday, March 16, 2001 1:18 PM |
Related manuals for Oki OKILAN 3100e
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine