54OkiLAN 3100e Network CardSNMP Manager (HP OpenView)O k i p a g e 1 4i a n d t hi s n et w o rk c a rd s upp ortManagement Information Base (MIB).MIB is information that is sent/received between themanaging host and the devices that are managed, withSNMP protocol, for the network management, definedin RFC1213 (MIB II).The structure of the MIB is expressed by AbstractSyntax Notation One (ASN.1). Normally the results ofcompilation to the C-Language source using the ASN.1compiler are used in a management software and adevice to which it is incorporated.Of the MIBs defined by various RFCs, Okipage 14isupports Private MIB only.For the Okipage 14i, please contact your local supplierabout an ASN.1 file.By reading or rewriting MIB values using the variousSNMP tools that use the SNMP protocol, you canmanage printers on the network. This user guideexplains how to refer to, set and change MIB, using theOpen View Network Node Manager of Hewlet PackardCorporation.MIBs set values and changing set valuesMIBs set valuesUsing the Network Node Manager attached to the HPOpenView, you can check the current settings of themain unit of the Okipage 14i printer connected to thenetwork or network card.1. Start Network Node Manager.2. Open [IP Map] of the segment to which theprinter is connected.3. Devices connected to that segment which havetheir own IP addresses are displayed on [IP Map]window in icons. The device(s) that is normallyoperating is in green icon and those, which arenot, are displayed in red icon.4. Click once on the IP address icon of the Okipage14i you want to reference. The surroundings ofthe icon will turn grey. After making sure that theicon’s surroundings have turned grey, doubleclick on the icon.5. Pull down the [Monitor] menu and select[Browse MIB: SNMP...] from [MIB Values].6. When [Browse MIB] window opens, enterOkipage 14i IP address in [Name or IP Address]text box.3100euGB.book Page 54 Friday, March 16, 2001 1:18 PM