28 OKIOFFICE 87 User’s GuideMFP FunctionTo use your MFP machine as a PC Printer or PC Scanner, you need toinstall the MFP (Multi-Function Peripheral) software. A PC Connector isalready included in the MFP machine as standard equipment. For detailsregarding MFP software, please refer to the separate booklet on the“MFP Function.”Driver SetupWindows 2000Note: Administrator’s authority is required for installation withWindows 2000.1 Make sure that both the printer and the computer are turned OFF.2 Connect the fax machine and computer with a parallel interfacecable.3 Turn the computer ON and allow Windows to start.4 Turn the fax machine ON. At the prompt telling that a new devicehas been detected, select Cancel.5 Insert the Unimessage Pro XL CD-ROM into your CD-ROM drive.6 After the setup program has automatically started, click Setupdevice driver and Unimessage Pro and follow the on-screeninstructions as appropriate This installs both the printer driver andthe Unimessage Pro software.Note: If you want to install only the driver, clickSetup device driver.Note: If the setup program does not automatically start orAuto insertnotification is turned off, clickStart®Run.... Type inD:\SETUP.EXE (where D is the drive letter of your CD-ROMdrive) and clickOK.7 When the Fax Port Installation dialog appears, click OK.
