78 OKIOFFICE 87 User’s GuideFLASH/EARTH/NORMAL: If your MFP machine is connected to aPBX, this function tells your MFP machine about the type of PBX lineyour MFP machine is connected to. Available settings are normal (N),flash (F) and earth (E).AUTO START: When this function is turned on, your MFP machineautomatically begins dialing as soon as you have selected a locationby pressing a One-Touch key or entering an Auto Dial code. You donot have to press START. Available settings are on and off.DIAL PREFIX: If your MFP machine is connected to a PBX, use thisfunction to tell your MFP machine what access number is used toobtain an outside line from your PBX. You can enter up to 4 digits. SeeConnecting to a PBX in the Installation section for instructions onchanging this setting.Changing Your Dial Parameter Settings2:DIAL PARAMETERYES( ) NO( /1-8)+ +SELECTFUNCTIONUSERPROG9/SPACE ABC21 Press the SELECT FUNCTION key.2 Press the 9/USER PROG. One-Touch key.3 On the numeric keypad, press 2. The display shows 2:DIAL PA-RAMETER.4 Press YES until the display shows the dial parameter you wantto change.5 Repeatedly press NO until the setting you want appears in thedisplay.6 Press YES to confirm your selection. The name of the next dialparameter setting appears in the display.7 Press the SELECT FUNCTION key to finish.
