Advanced Operations 61Initiating a Relay Broadcast1 Load your documents.2 Press the SELECT FUNCTION key.3 Press the 4/RELAY INIT.-TX One-Touch key. The display showsRELAY PASSWORD.4 Using the numeric keypad, enter a password of up to 20 digitswhich is the same as the relay keyword programmed into the relaykey station.5 Press the START key. The display shows REMOTE LIST NO.6 Using the numeric keypad, enter a number of up to 20 digits whichcorresponds to a relay group programmed into the relay key station.7 Press the START key. The display shows SELECT LOCATION.8 Select the location of the relay key station. Refer to the instructionsbelow.To Select Using Do ThisA One-Touch key Press the One-Touch key.An Auto Dial number Press the AUTO DIAL key, then enter the three digitAuto Dial number on the numeric keypad.A number dialed on Dial as you would on a normal telephone.the numeric keypad9 Press the START key. Your MFP machine begins sending the fax.
