Basic Operations 43Stopping a TransmissionTo stop a transmission while it is in progress, follow the instructionsbelow.1 Press the STOP key twice. The display shows STOPPED.2 If documents are stuck partway through the document feeder, youmay see a RELOAD DOCUMENT message on the display. Pressthe STOP key again. Your MFP machine feeds the document therest of the way through the document feeder.Sending a Fax to Multiple Locations (Broadcasting)Your MFP machine’s broadcasting feature allows you to send a documentto many different locations at the same time. For each broadcast opera-tion, you can select as many One Touch keys, groups, and Auto DialCodes as you like. You can also manually enter up to ten telephonenumbers on the numeric keypad.Performing a Broadcast Operation1 Load your documents.2 Select a location. Refer to the instructions below.To Select Using Do ThisA One Touch key Press the One Touch key.An Auto Dial number Press the AUTO DIAL key, then enter the two digitAuto Dial number on the numeric keypad.A group Using the numeric keypad, press the # key, then enterthe number of the group.A number dialed on the Dial the number as you would on anumeric keypad normal telephone, then press START.3 Select another location within 3 seconds after step 2.4 Repeat steps 2 and 3 as often as necessary to continue selectinglocations.5 When you are finished selecting locations, press START. ENTRY ISOK? displays.6 Press START. Your MFP begins scanning the document and dialingthe numbers.
