Base Reference PointCommand Structure A3H-aaaaVbbbb- = This character is optional. When present, it specifies that thehorizontal offset is the negative direction. If it is left out theoffset direction is positive.aaaa = Horizontal Print Offset (-832 to 0832)bbbb = Vertical Print Offset (1 to 9999)Example: A3H100V50Placement: Preceding all images that are based on the new base referencepoint.Default: Current V and H offset settings in the printer configuration.Command Function To establish a new reference point for the current label. The base referencepoint is the top left corner or “origin” from where all print position commandsare based.This command may be very helpful when using labels less than four inch wideto place images on the printable label surface. It may also be used to moveimages past preprinted fields on a label.Input to Printer AL0101H25V25WB0NORMAL REFERENCE POINTA3H300V75H25V50WB0NEW REFERENCE POINTQ1ZPrinter Output20