Print Length, ExpandedCommand Structure AX Sets the print length to 14”(356 mm)AR Resets the maximum print length to 7”(178 mm)EX0 Sets the print length to 50”(1270 mm)Example: See abovePlacement: Must follow the Start Code command and be in its separate data stream.Default: ARCommand Function To enlarge the maximum print length (in feed direction) for a label.Input to Printer AAXAZAH50V100WB1EXPAND TO:H50V2700WB114 INCHESQ1ZPrinter OutputSpecial Note 1. AX is effective until AR or EX0 is sent to reset the printer to its standard print length,or until the printer is repowered.2. It may be included in an independent data stream to specify the size of the maximumprint area.3. This command cannot be used with the & Store Form Overlay command.14”EXPAND TO:14 INCHES51