Continuous Forms PrintingCommand Structure NoneThe printer locates the end of adhesive label by sensing the backing betweenlabels or through the use of an Eye-Mark (black rectangle on the reverse sideof the backing). It locates the end of a tag from a notch, eye-mark, or a hole be-tween tags. Both sensors should be disabled when printing continuous forms bysending the CI0 command to disable the sensor (See page 96).If you will be using continuous labels or tags, the printer must be told to stopfeeding in another manner. The length is determined by the position of the lastprinted image on the label or tag. The printer will stop feeding when the field isfinished printing. The length may be increased with printed spaces if necessary.There is no command code to control label length.29