Media SizeCommand Structure A1aaaabbbbaaaa = Vertical Media Size in dots (0 to Vmax).bbbb = Horizontal Media Size in dots (0 to Hmax).Example: A132000832Placement: Separate data stream to the printer.Default: A136000832Command Function To set the size of the media.Input to Printer AA108320812ZPrinter Output There is no printer output resulting from this command. It is used to auto-matically adjust the offset values for the size of label being used.Special Notes 1. The Base Reference point is always on the right (looking at the front of theprinter) side of the print head. This command adjusts the Base Reference Pointto correspond with the right edge of the loaded media.2. If the label size is changed, then this command must be respecified tocentralize the print image on the label.3. All eight variables (“aaaa” and “bbbb”) must be included in this command.54
