Character, Custom-DesignedCommand Structure Store Command : TabccRecall Command: Kab90cca = 1 16x16 matrix2 24x24 matrixb = Specifies the character encoding method for the data streamH hexadecimal charactersB Binary charactersIf B is specified than both 90 and cc codes are represented by onebyte code separately.cc = Code to store/recall the character. Valid code ranges are 21H to52H in Hex or “!” to “R” in Binary.(data) = Data to describe the character image either in Hex or Binaryformat.Example: T1H3FK1H903FSee Appendix C for a more detailed explanation.Placement: The Store command is typically sent in its own data stream to theprinter, between the Start/Stop commands. The Recall command issent in a secondary data stream to print the character, and followsany necessary position or Size commands.Default: NoneCommand Function To allow for the creation, storage, and printing of custom characters, such asspecial fonts or logos. Up to 50 individual characters may be stored in the cus-tom character volatile memory.Input to Printer See Appendix C for a detailed explanation.AT1H3F0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C007C00Z22
