Print SpeedCommand Structure CSaa = Designates the speed selection.1 = 1 ips (25 mm/s)2 = 2 ips (50 mm/s)3 = 3 ips (75 mm/s)4 = 4 ips (100 mm/s)Example: CS3Placement: Must be placed immediately after A and immediately beforeZ in its own data stream.Default: As previously set in the printer configuration.Command Function To specify a unique print speed through software for a particular label. Thisallows flexibility in finding the best performance and quality for the particularlabel format, media, and ribbon. All subsequent labels will print at this speedunless the speed is changed with this command.Input to Printer ACS3ZPrinter Output There is no printer output for this command. It sets the print speed of theprinter to 3 inches per seconds.Special Notes This becomes the new setting in the printer configuration for all subsequent printjobs, unless changed. The settings is stored in non-volatile memory and is notaffected by cycling the power.59