44158801TH Rev.2 141 /Oki Data CONFIDENTIAL“Numeric” button“Address book” button“FTP Address” buttonDisplay“Menu” button“Reset” button“Power save” button“Power” lamp“Alarm” lamp“Sleep” lamp“One-touch” buttons“Copy Scaling selection” button“Copy mode” button“Cursor” button“Buck” button“OK” button“Additional settings” button“Mono” button“Color” button“Stop” button“Zoom” button“Fax mode” button“Send Mode” buttonZoom display5. PANEL SWITCH FUNCTIONS5.1 Scanner Operator Panel5.1.1 Layout5.1.1.1 Buttons(1) Copy Scaling selection buttonThis is to select scaling from the preset percentages (50%, 70%, 86%, 115%, 141%, 200%,93%, Fit To Page, or Variable). (This function is only available in copy mode.)(2) Zoom buttonThis is to make enlargements or reductions. Scaling can be made in 1% increments. (Thisfunction is only available in copy mode and also when Variable is selected.) The scaling isselectable from 25% up to 400%.(3) One-touch buttonsThis button makes it possible to send a facsimile with a touch of a button.(4) Density buttonThis is to select the density level.(5) Numeric buttonsThese are used to enter the number of copies or E-mail addresses.(6) Copy mode buttonThis button is used to switch the mode of the scanner to copy mode, lights up when pressedand stays blue. After pressing this button, some settings related to the copy function becomeavailable.(7) Send Mode buttonThis button is used to switch the mode of the scanner to Send mode, lights up when pressedand stays blue. After pressing this button, some settings related to Send functions becomeavailable. If the device is not operated in the selected period of time (20 sec. to 180 sec.) toswitch to standby mode, Send mode is switched to standby mode that is set as the defaultmode. The default setting of standby mode is Copy mode.
