Oki Data CONFIDENTIAL44158801TH Rev.2 44 /3. INSTALLATION3.1 Cautions, and do's and don'ts• Do not install the MFP at high temperature or near fire.• Do not install the MFP in a location where chemical reaction can take place (laboratory,etc.).• Do not install the MFP in the proximities of inflammable solvents, such as alcohol, paint thin-ner, etc.• Do not install the MFP within reach of small children.• Do not install the MFP in an unstable location (e.g., on a rickety bench or grade).• Do not install the MFP in a location laden with moisture or heavy dust, or in direct sun.• Do not install the MFP in an environment with sea wind or corrosive gas.• Do not install the MFP in a location with heavy vibration.• In the event that the MFP is inadvertently dropped or its cover is damaged, remove the pow-er plug from the power outlet and contact Customer Center.Such mishap could lead to an electric shock, fire or injury.• Do not connect the power cord, MFP cable or grounding wire in any other manner than theway specified in the manual. Failure to observe the above could result in fire.• Do not stick in an object into the vent hole.Such action could lead to an electric shock, fire or injury.• Do not place a glass filled with water or the like on the MFP.Such action could lead to an electric shock or fire.• When the MFP cover has been opened, do not touch the fuser unit.Burns could be suffered.• Do not throw the toner cartridge or the image drum cartridge into fire.Dust explosion could cause burns.• Do not use a highly combustible spray near the MFP.Fire could be caused, since the MFP contains a part that gets extremely hot inside.• In the event that the cover becomes unusually hot, emits smoke, ill odor, or abnormal noise,remove the power plug from the power outlet and contact Customer Center.Fire could break out.• If water or any other liquid enters the inside of the MFP, remove the power plug from thepower outlet and contact Customer Center.Fire could break out.• If a pao not operate or disassemble the MFP in any other manner than the way specified inthe manual.Failure to observe this warning could result in an electric shock, fire or injury.
