Oki Data CONFIDENTIAL44158801TH Rev.2 72 /3.8 Confirmation of paper used by the userLoad the media used by the user in the MFP, make Media Type/Weight settings, execute theMenu Map/Demo print, and check to make sure that the printouts are free from toner flaking.*1: The MFP comes with Media Type set to [Light] at the factory.*2: The thickness and type of paper can be set on the operator panel and also via the MFPdriver. If those parametersare set via the MFP driver, the settings of the MFP driver willhave priority. If [Auto selectio] is selected in [Feed Trey] of the MFP driver, or [MFP set-ting] is selected in [Media weight] , the print will take place with the settings made on theoperator panel.*3: The paper thickness with which two-sided print can be conducted is from 65 to 90kg (75 to105g/m2) of ream weight.*4: For postcards and envelopes, there is no setting of Media Weight or Media Type.*5: For OHP sheets, Media Type only is set. There is no need to make setting in Media Weight.Memo If [Heavy] or [Ultra heavy] is selected in Media Weight, or [Label paper] or [OHP] inMedia Type, the print speed will be affected.Types WeightSetting values of the operationpanel Setting *2 for [Mediaweight] of the printerdriverMedia weight Media type *1Regularpaper *355~64kg (64~74g/m2) LightLightLight65~89kg (75~104g/m2) Medium Medium90~103kg (105~120g/m2) Heavy Heavy104~172kg (121~200g/m 2 ) Ultra heavy Ultra heavyPost card * 4 – – – –Envelope *4 – – – –Label paper Less than 0.1~0.17mm Thicker paper Label paper Label paper 10.17~0.2mm Thickest paper Label paper 2Transparency*5 film– – TransparencyfilmTransparency film
