Oki Data CONFIDENTIAL44158801TH Rev.2 154 /6.3 Functions of user's maintenance menu6.3.1 Maintenance menu (For end users)There is a maintenance menu category among the normal menu categories. (Different from thesystem maintenance menus)The items that can be set under this menu are indicated below.Maintenance MenuValues in shaded areas are initial settings.Category Operator Panel Display FunctionItem (Upper Display) Value (Lower Display)MaintenanceMenuMENU RESET EXECUTE Initializes menu settings.SAVE MENU EXECUTE Stores current menu settings.RESTOREMENUEXECUTE Changes menu settings to stored ones. Displayed onlywhen menu settings have been stored.POWER SAVE ENABLEDISABLESets Power Save mode enabled/disabled. Shift timeto enable Power Save mode can be changed using“POWER SAVE SHIFT TIME” on “SYSTEM CONFIG.MENU”.PAPER BLACKSET0+1+2-2-1Corrects print nonuniformity due to temperaturevariation. With faded images, change the value.With scattering or snowing images in print output ofhigh print density, decrement the value. With fadedimages in print output of high print density, incrementthe value.PAPER COLORSET0+1+2-2-1Corrects print nonuniformity due to temperaturevariation. With faded images, change the value.With scattering or snowing images in print output ofhigh print density, decrement the value. With fadedimages in print output of high print density, incrementthe value.OHP BLACKSET0+1+2-2-1Used to correct dispersion of printing due totemperature difference. Change the value if a printedOHP sheet is blurred.If an output shows a scattered- or snowing-likephenomenon in a high-density print part, decrementthe value. If an output is blurred, increment the value.OHP COLORSET0+1+2-2-1Used to correct dispersion of printing due totemperature difference. Change the value if a printedOHP sheet is blurred. If an output shows a scattered-or snowing-like phenomenon in a high-density printpart, decrement the value. If an output is blurred,increment the value.
