Oki Data CONFIDENTIAL44158801TH Rev.2 204 /7.6.2 Cleaning the ADFFrom time to time the pad assembly and feeding rollers may become contaminated with ink,toner particles or paper dust. In this case, the machine may not feed documents smoothly. Ifthis occurs please follow the cleaning procedures to return your machine to its original state.1. Moisten a cotton swab with isoprophyl alcohol (95%).2. Gently open the ADF front cover. Wipe the feeding rollers by moving the swab from side toside. Rotate the rollers forward with your finger and repeat the above cleaning proceduresuntil the rollers are clean. Be careful not to snag or damage the pick springs.3. Wipe the pad in the direction from top to bottom. Be careful not to hook the pick springs.4. Close the ADF unit. Your machine is now ready to use.Feeding RollerADF PadPick Spring7.6.3 Cleaning a Paper JamIn the event of a paper jam, follow the procedures below to remove the paper:1. Gently open the ADF front cover to the left.2. Carefully pull the paper out of the ADF unit.3. Close the ADF front cover. Your MFP is now ready to use.
