Oki Data CONFIDENTIAL44158801TH Rev.2 205 /7.6.4 Replacing the ADF padAfter scanning approximately 100,000 pages through the ADF, the pad module may beworn out and you may experience problems with document feeding. In this case, it is highlyrecommended to replace the pad module with a new one. For ordering the pad module, pleaseconsult your nearest dealer and follow the procedure below to replace it.Disassembling Procedure1. Pull the Paper Jam Release button.2. Open the ADF front cover to the left.3. Press both sides of the ADF snap-in pad module inwardly with your fingers to pull out theADF snap-in pad module.Assembling Procedure1. Open the Pad-cover and remove the spare ADF-Pad. Be careful not to touch therubbearea when removing the pad.2. Press both arms of the ADF pad module inwardly with your two fingers.3. Place it into the holes until it snaps into place.Spare Pad
