Oki Data CONFIDENTIAL44158801TH Rev.2 70 /3.7 Connection methodsPreparing a USB cableNote! • No MFP cable is supplied with the MFP. Provide one separately.• Prepare a USB type cable separately.• When connection is to be made in "Hi-Speed" mode of USB2.0, use a USB cableconforming to the Hi-Speed specification.Switching OFF the MFP and computerMemo The USB cable can be plugged in or unplugged with the computer and MFP switchedON. However, to be able to conduct the subsequent installation of the MFP driver andUSB driver securely, the power to the MFP should be turned OFF.Interconnecting the computer and the MFP1) Plug the USB cable into the USB interface connector of the MFP.2) Plug the USB cable into the USB interface connector of the computer.Note! Be careful not to plug the USB cable into the network interface connector. Such wrongconnection could cause malfunction.USB interface connector
