DMTA-10022-01EN, Rev. C, January 2015Chapter 1221.5 Keypad FunctionsThe 45MG comes either with the English or the international keypad (see Figure 1-5on page 22). The functions are the same for both keypads. On the internationalkeypad, the text labels on many keys are replaced by pictograms. In this document,keypad keys are referred to using the English label in bold and within brackets (ex.:[MEAS]).Figure 1-5 The 45MG keypadsEach key is labelled according to its primary function. The area immediately abovecertain keys contains a secondary key function that can be activated by first pressing[2nd F]. Throughout this document, references to a secondary function are written asfollows: [2nd F], [Primary] (Secondary). For example, the instruction to activate theREF Value function is written as follows: “Press [2nd F], [SAVE] (REF Value)”.The [], [], [], and [] keys, along with the [ENTER] key, are used to select menuitems or screen parameters, and to change parameter values. Use the [MEAS] key atany time to return to the measurement screen. The yellow keys are related tocalibration.Table 2 on page 23 lists the key functions available on the 45MG keypad. Manyfunctions are optional, and may not be available depending on which softwareoptions have been purchased.English keypad International keypad
