DMTA-10022-01EN, Rev. C, January 2015Initial Setup 434. Initial SetupThe following sections describe basic system configurations.4.1 Setting the User Interface Language and Other System OptionsThe 45MG can be configured to display the user interface in the following languages:English, German, French, Spanish, Japanese, Chinese, Russian, Swedish, Italian,Norwegian, Portuguese, or Czech. You can also set the character delimiting the radixof a number.The 45MG includes a beep tone generator that confirms when a key is pressed andnotifies you of an alarm condition. The beeper can be set to On or Off.To save battery power while the instrument is not in use, enable the inactive timefunction so that the instrument automatically turns off when no key has been pressedand no measurement has been made within a period of about six minutes.To change the user interface language and other system options1. In the measurement screen, press [SETUP], and then select SYSTEM.2. In the SYSTEM screen (see Figure 4-1 on page 44):a) Set BEEPER to ON or OFF.b) Set INACTIVE TIME to ON or OFF.c) Set LANGUAGE to the desired language.d) Set RADIX TYPE to the desired character (PERIOD or COMMA) in order toseparate the integer and the decimal digits.
