DMTA-10022-01EN, Rev. C, January 2015Software User Interface Elements 39In the remainder of this document, the above procedure is summarized by the simpleinstruction to select a specific parameter or list, and its value. For example:“In the MEAS screen, set MEAS MODE to THICKNESS.”3.4 Selecting the Text Edit ModeThe 45MG offers two methods of editing the value of alphanumeric parameters.Either the virtual keyboard or traditional method can be used. The virtual keyboardappears on the screen to display all the available characters that can be used (see“Editing Text Parameters Using the Virtual Keyboard” on page 39 for details). Withthe traditional method, you must select each character from a hidden list of standardsorted letters, numbers, and special characters (see “Editing Text Parameters Usingthe Traditional Method” on page 41 for details).To select the text edit mode1. In the measurement screen, press [SETUP], and then select SYSTEM.2. In the SYSTEM screen, highlight TEXT EDIT MODE, and then select the desiredmode (VIRTUAL or TRADITIONAL).3. Press [MEAS] to return to the measurement screen.3.4.1 Editing Text Parameters Using the Virtual KeyboardWhen TEXT EDIT MODE is set to VIRTUAL, the virtual keyboard appears when analphanumeric parameter is selected (see Figure 3-9 on page 40).
