Installing and removing applications698. If you need to change the destination of the application you are installing, clickChange Destination in the Install Handheld Files window, and then use thearrows to move applications between your handheld and an expansion card.9. Click OK to close the Change Destination window.10. Close the Install Handheld Files window.11. Perform a HotSync operation to install the selected application(s) on yourhandheld. See “Performing cradle/cable HotSync operations” in Chapter 17 fordetails.NOTE Files that remain in the list after you perform a HotSync operation werenot installed. This can happen if the file type was not recognized during theHotSync operation. Expansion cards may hold applications that use files otherthan the Palm application files. For your handheld to recognize such a file, youmust first launch the associated application at least once.Removing applicationsIf you run out of memory or decide that you no longer need an application youinstalled, you can remove applications from your handheld or from an expansioncard. From your handheld, you can remove only add-on applications, patches, andextensions that you install; you cannot remove the applications that reside in theROM portion of your handheld.To remove an add-on application:1. Press Home .2. Press Command Stroke + D.Alternately, press Function + Menu , and then select Delete on theApp menu.3. Tap the Delete From pick list and select either Handheld or Card. If you wantto delete applications from a card, the card must be seated in the expansioncard slot.
