48TAPEFinding specific scenes(image search)STILL ADV PAUSE STILL ADVINDEXSELECTSTOP INDEXMULTI/P-IN-P REC A.DUBPLAYVOL +-While in the shooting standby mode, you cansearch through any images you have shot.This is useful when you want to find a point fromwhich to continue shooting so two scenes comeone after the other.Camera Remote controlor1 Press or in the shooting standbymode.The tape plays forward or backward while youare pressing the button.2 Release the button when you find the pointyou are looking for.The camera returns to shooting standby mode.• The scenes may not connect smoothly for certainrecording states.Index recordingWhen you press the USER button to which theINDEX/MEMO function has been allocated atany point during shooting or recording, the indexsignals are recorded if a tape is being used. Whenthe same USER button is pressed in shooting orrecording pause mode, recording standby status isestablished for the index signals. The index signalsare recorded when shooting or recording is started.You can conduct searches (index searches) duringplayback by recording these signals. (Page 76)Shooting techniques for different targets (continued)Pre-recording (PRE REC)This function is used to record pictures and soundstarting at a fixed time (approx. 3 seconds for HDrecording or approx. 7 seconds for 480i recording)before the time when the actual recording hasbeen set to start.When recording to a P2 card, making the settings in the RECORDING SETUP screen (page 107) enablesspecial recording functions such as Pre-recording, Interval Recording, One Shot Recording, and LoopRecording.These special recording functions can be used only when the settings below are established.• OPERATION TYPE item (page 101): VIDEO CAM• Recording format: 1080i/60i, 720P/60P, 480i/60i, 1080i/30P, 720P/30P or 480i/30PRecording startoperationRecording stopoperationActualrecording timePre-recordingtime(Time)Using the special recording functions P2