Playback73You can perform any of the following operations. Ifnecessary, make preparations prior to undertakingthe operations.Loading the metadata• Insert the SD memory card on which themetadata is recorded into the unit. (For details oncreating the metadata, see page 58.)Selecting whether to record the metadata onthe P2 cardInitializing the metadata inside the unitDisplaying the metadata inside the unit1 On the thumbnail screen, press the MENUbutton.A menu now appears. (Page 65)2 Select META DATA using the andbutton, and press the (or ) button.3 Select the item using the and buttons,and press the button.USER CLIP NAMELOAD:Select this to load the metadata recorded onthe SD memory card into the unit.When the button is pressed with operationmoved to LOAD, the metadata on the SDmemory card will be displayed. Therefore,press the button again.Select YES to load the metadata or NO tocancel the loading, and press the button.• If characters other than single-bytealphanumeric characters are used in themetadata file name to be loaded, they aredisplayed as “∗”.RECORD:Select this to set whether to record themetadata to be loaded into the unitsimultaneously on a P2 card.Select YES to record the metadata or NO tocancel the recording, and press the button.The factory setting for this mode is OFF.USER CLIP NAME:The USER CLIP NAME recording method isselectable. Please refer to Appendix (page133).INITIALIZE:Select this to initialize the metadata which hasbeen recorded in the unit.Select YES to initialize the metadata or NOto cancel the initialization, and press thebutton. All the settings including the ON orOFF setting for RECORD are now cleared.PROPERTY:Select this to display the metadata which hasbeen recorded in the unit.EXIT: Select this to return to the last screen.4 Press the MENU button to release the menumode.P2Uploading the metadata (META DATA)
