80S-VIDEOIN/OUTCOMPONENTOUTVIDEOIN/OUTIN/OUTAUDIOCH1CH2S-VIDEOIN/OUTCOMPONENTOUTVIDEOIN/OUTIN/OUTAUDIOCH1CH2Video deck (Dubbing)When a component video cable is used for the connection, only the output signals from the unitwill be available.S-video cable(optional) VCRConnect to the output terminal on theexternal device when the video signals andaudio signals of an external device are to beinput to the unit. (Tape mode only)Connect to the input terminal on the externaldevice when the unit’s video signals andaudio signals are to be output to an externaldevice.• Except when performing audio dubbing onexisting recordings, audio signals cannot berecorded unless video signals are input to theS-VIDEO IN/OUT connector and/or VIDEOIN/OUT jack.• The signals of the S-VIDEO IN/OUT terminaltake priority over the signals of the VIDEO IN/OUT terminal.TV/Monitor (playback/dubbing)When a component video cable is used for the connection, only the output signals from the unitwill be available.Video cable(optional)TV/MonitorAudio cable (optional)White: CH1 (left channel) soundRed: CH2 (right channel) soundConnect one of thesecables to the terminal onthe video deck.Video cable (optional)Audio cable (optional)White: CH1 (left channel) soundRed: CH2 (right channel) soundComponent videocable (included)Component videocable (included)Connect one of thesecables to the terminal onthe television.S-video cable(optional)• When the COMPONENT OUT connectors and the S-VIDEO OUT or VIDEO OUT connector have beenconnected concurrently, the COMPONENT OUT connectors take priority. Signals cannot be outputthrough both sets of connectors at the same time.• When connecting the camera to another device using the component video cable, if the terminal on thedevice to which it is to be connected is a BNC type, use the pin-BNC conversion plug provided.Connecting external units (continued)
