Playback65Thumbnail screenVideo data created on the P2 card in one shooting session is called a clip. When the MCR mode has beenestablished by the MEDIA switch set to the P2 status, the clips will be displayed on the LCD screen asthumbnails. (When there is a large number of clips, it will take some time for them to be displayed on thescreen.)You can perform the following operations using the thumbnail screen.• Play, repair and delete clips as well as add and delete shot marks.• Format P2 cards and SD memory cards.• Load the metadata (shooting information, etc.) from SD memory cards to the unit.Basic thumbnail screen operationsTo use the thumbnail menu:1 On the thumbnail screen, press the MENU button to display the menu.2 Select the item using the and buttons, and press the (or )button.If another menu appears, repeat this step.• To return to the previous screen, select EXIT and press or press thebutton.• To release the menu mode, press MENU.To select thumbnails: Select the thumbnails (the yellow frame moves) using the and buttons,and press the button (the color of the frame changes to blue-green). Press the button again todeselect the clip. To scroll the pages, press the PAGE (- or +) button.To play back clips: Select the thumbnail, and press the button. (For details on playback, see page 63.)• Only clips whose format is the same as recording format 6 shown in the figure below can be playedback.SETMENUPAGE/AUDIO MON/VAR12THUMBNAIL OPERATION PROPERTYALL CLIPSAME FORMAT CLIPSSELECTED CLIPSMARKED CLIPSTEXT MEMO CLIPSSLOT CLIPSSETUPEXITDELETEFORMATREPAIR CLIPREPAIR CLIP(LOOP)EXITCLIP PROPERTYCARD STATUSDEVICESPROPERTY SETUPSYSTEM INFOEXITMETA DATALOADRECORDINITIALIZEUSER CLIP NAMEPROPERTYEXIT12345678P2• Thumbnail screens are not output from the COMPONENT OUT terminal. (Continued on the next page)
