Panasonic AG-HVX200AP Operating Instructions Manual

Also see for AG HVX200 - Camcorder: Brochure & specs Brochure & specs Brochure & specs

Contents

Panasonic AG-HVX200AP Operating Instructions Manual Manual pdf 79 page image

Editing79121394Digital video equipment (Dubbing)You can connect a digital video unit equipped with a DV connector and digitally transfer videoand audio signals as well as time code.• Before proceeding to connect or disconnect 1394 cable, be absolutely sure to turn off the power of theunits.• Before proceeding to connect the unit which uses a 6-pin type 1394 connector,carefully check the shape of the 1394 cable and the connectors on the 1394cable. Connecting a connector upside down may damage the parts inside theunit and cause malfunctioning. Furthermore, connect the 1394 cable to the unitwhich uses a 6-pin type 1394 connector first. ( → )• When recording signals from an external unit, first check that video signals aresupplied.• While signals from an external unit are being recorded, do not stop output onthe external unit side or disconnect any of cables. This may lead to a failure torecognize the signals when you do recording again.• While signals from an external unit are being recorded, do not change the format of the signals beingoutput from the external unit. Doing so may make it impossible to record correctly.• Do not apply force when connecting 1394 cable to 1394 connector as this may damage the connector.• No guarantees are made for the playback images when signals from an external device are recorded.(Video check level)• The automatic recording function in the DVD unit may not function properly. In a case like this, proceedwith the recording manually.This camera1394 cable (optional)4-pin typeOther Digital video equipment6-pintype4-pintype• Before proceeding to connect or disconnect 1394 cable, be absolutely sure to turn off the power of theunits.• Before proceeding to connect the unit which uses a 6-pin type 1394connector, carefully check the shape of the 1394 cable and the connectorson the 1394 cable. Connecting a connector upside down may damage theparts inside the unit and cause malfunctioning. Furthermore, connect the1394 cable to the unit which uses a 6-pin type 1394 connector first. ( →). The above also applies to USB cable as well.• Do not apply force when connecting 1394 cable to 1394 connector as this maydamage the connector.• When connecting to a PC, attach the ferrite core (provided) to the 1394 cablein such a way that the whole ferrite core fits within about 5 cm from the PC’sconnectors. After threading the cable as shown in the figure on the right, closethe ferrite core until it clicks into place and locks.6-pintype4-pintypeFerrite core (provided)