19Display positionThe position of the superimposed displays can bechanged using the setup menu item No.007 (CHARAH-POS) and No.008 (CHARA V-POS) settings.Superimposed ScreensWhen the PAGE button and DATA+ button or DATA–button are pressed, the counter display appearstemporarily while the buttons are held down so thatthe settings can be checked.It is also possible to proceed with the settings whilechecking the actual situation using the DATA+ buttonand DATA– button while the PAGE button is helddown.When a TV monitor and the VIDEO OUT2 connectorare connected, the abbreviations of the control signal,time code, etc. are displayed on the TV monitor.These displays can be turned ON or OFF using thesetup menu item No.005 setting.Display charactersThe background of the characters used for thesuperimposed displays can be changed using thesetup menu item No.009 (CHARA TYPE).TCR 22 : 22 : 22 : 22TV monitorTTCCRR 2222 :: 2222 :: 2222 :: 2222TV monitorTCR 22 : 22 : 22 : 22TV monitorTCR 22 : 22 : 22 : 22TV monitorTCR 22 : 22 : 22 : 22TV monitorAbbreviationsCTL (control signal)TCR (time code playback value)UBR (user’s bit playback value)REM (remaining tape)In the VTR operation mode, “BOT” (beginning of tape)or “EOT” (end of tape) appears at the start of the linewhen the beginning or end of the tape has beendetected.Examples of displays:EOT STOP(stopped at the end of the tape)BOT STANDBY OFF(on standby at the beginning of the tape)Operation modeThe content to be displayed can be selected using thesetup menu item No.006 (DISPLAY SEL).TIME : Counter valueT&STA : Counter value, VTR operation modeT&S&M : Counter value, VTR operation mode, tapeformat or error messageCounter valueTIME modeTCR 22 : 22 : 22 : 22TV monitorCounter valueT&STA modeTCR 22 : 22 : 22 : 22STOPTV monitorVTR operation modeCounter valueT&S&M modeTCR 22 : 22 : 22 : 22STOPDVCPRO_HDTV monitorVTR operation modeTape format or errormessage
