27101 SHTL MAX00000001X8.4X16For setting the maximum shuttle mode speed when using the externalcontroller connected to the 9-pin remote connector.0: 8.4a normal speed1: 16a normal speed104 REF ALARM00000001OFFONFor setting whether the warnings are to be indicated when the REF VIDEOhas not been connected.1: No warnings are indicated.2: Warnings are indicated by the STOP lamp which flashes.152 HUMID OPE00000001OFFONFor setting the operation to be performed when condensation has formed.0: The unit does not operate when condensation has formed.1: The unit can be operated when condensation has formed but noguarantee is made that it will operate properly.Due to the possibility of tape damage and other problems, select the “0:Unit does not operate” setting for normal operation.106 EJECT EE SEL00000001EEBLANKFor setting the video and audio output statuses when the tape is ejected.0: The signals are always output in the E-E (electric modulation to electricplayback) mode regardless of the position of the TAPE/EE switch.1: The output status changes according to the position of the TAPE/EEswitch.EE : The signals are output in the E-E mode.TAPE : A blank is output for the video signals, and the audio signals aremuted.OPERATIONItem SettingNo. Superimposeddisplay No. SuperimposeddisplayDescription of settingThe underlining denotes the factory mode.Setup Menus110 AUTO REW00000001OFFONFor setting whether the tape is to be rewound automatically to its startwhen the tape-end has been detected.0: The tape is not rewound.1: The tape is rewound to its start.112 FRZ MODE SEL00000001DISSTBOFFFor setting the video output when the mode has moved from playbackimages to the STANDBY OFF (half loading) mode.0: The video output is muted.1: The playback image appearing at the moment when the STANDBY OFF(half loading) mode is established is frozen and output.114 REC INH LAMP00000001LIGHTFLASHFor setting the REC INHIBIT lamp operation when the cassette is set to theaccidental erasure prevention mode.0: The lamp lights.1: The lamp flashes.The REC INHIBIT lamp always lights regardless of this setting when theREC INHIBIT switch on the front panel is set to the ON position.115 EJECT SW INH00000001RECOFFFor setting a restriction on the operation of the front panel’s EJECT button.0: Operating the button is prohibited while the recording mode isestablished.1: The button can be operated in any mode.117 M CASSTT INH00000001OFFONFor setting a restriction on recording onto M-size cassette tapes.0: Recording onto M-size cassette tapes is permitted.1: Recording onto M-size cassette tapes is prohibited.150 SEARCH SPEED00000001X4.1X8.4For setting the speed at which the tape is to decelerate when the frontpanel’s search button is pressed.0: 4.1a normal speed1: 8.4a normal speed
