Panasonic AJ- DCP Operating Instructions Manual

Also see for AJ-DCP: Operating instructions

Panasonic AJ- DCP Operating Instructions Manual Manual pdf 22 page image

22How to load the user defaultsSet the LOCAL/MENU/REMOTE switch to theMENU position.The VTR is set to the menu setting mode, andthe menu screen is displayed on the videomonitor.1Press the RESET button.The VTR is set to the default setting mode, andthe default setting screen is displayed on thevideo monitor.2Press the MENU-UP button or MENU-DOWNbutton to move the cursor to the LOADposition, and press the SET button.The VTR is set to the LOAD mode, and theLOAD screen is displayed on the video monitor.3SELECT MODE2 0 ESCAPE1 LOAD2 SAVE3 PROTECTSET–UP MENU 2 NOFACTORYUSER (ALL)USER (NOT SYSTEM)Press the MENU-UP button or MENU-DOWNbutton to move the cursor to USER (ALL), andpress the SET button.O If the cursor is moved to USER (NOTSYSTEM) and this operation is performed,operations are performed using the usersettings stored in the memory for all the menuswith the exception of the SYSTEM menu.O If the cursor is moved to NO and this operationis performed, operation returns to the menuscreen while the user settings stored in thememory remain unchanged.4Set the LOCAL/MENU/REMOTE switch to theLOCAL or REMOTE position.This completes the menu settings.5How to protect the menusSet the LOCAL/MENU/REMOTE switch to theMENU position.The VTR is set to the menu setting mode, andthe menu screen is displayed on the videomonitor.1By setting the unit to the menu protection mode,opening of the setup menus can be prevented evenwhen the LOCAL/MENU/REMOTE switch on the frontpanel has been set to the MENU position.Press the RESET button.The VTR is set to the default setting mode, andthe default setting screen is displayed on thevideo monitor.23SELECT MODE2 0 ESCAPE1 LOAD2 SAVE3 PROTECTMENU PROTECT OK?2 NOYESPress the MENU-UP button or MENU-DOWNbutton to move the cursor to YES, and pressthe SET button.The menu screen now appears.4Setup (Initial Settings)Press the MENU-UP button or MENU-DOWNbutton to move the cursor to the PROTECTposition, and press the SET button.The VTR is set to the menu protection settingmode, and the screen for checking the menuprotection function is displayed on the videomonitor.