Panasonic AJ- DCP Operating Instructions Manual

Also see for AJ-DCP: Operating instructions

Panasonic AJ- DCP Operating Instructions Manual Manual pdf 20 page image

20Setup (Initial Settings)The VTR’s main settings can be performed andchecked using the on-screen menus which aredisplayed on the video monitor connected to the VTR.They can also be performed and checked using theitem numbers and setting numbers which aredisplayed on the VTR’s front panel display.The VTR comes with a user setting memory so thatdesired settings can be stored in the memory aheadof time and recalled for use at any time.How to perform settings usingthe on-screen menuSet the LOCAL/MENU/REMOTE switch to theMENU position.The VTR is set to the menu setting mode, andthe menu screen is displayed on the videomonitor.1Press the MENU-UP button or MENU-DOWNbutton to move the cursor (2) to the nextmenu item to be changed.Pages can be scrolled up or down by pressingthe MENU-UP button or MENU-DOWN buttonwhile holding down the PAGE button.4Press the DATA– or DATA+ button to changethe setting.5Set the LOCAL/MENU/REMOTE switch to theLOCAL or REMOTE position.This completes the menu settings.7Press the SET button to enter the setting.To change multiple items, repeat steps 4, 5 and6.A setting can be canceled by pressing the MODEbutton.To change another item without entering thesetting, press the MODE button and then repeatsteps 4, 5 and 6.6Press the MENU-UP button or MENU-DOWNbutton to move the cursor (2) to the firstmenu item to be changed.2Press the MODE button, and select the settingfor each item.To return to the menu screen, press the MODEbutton while holding down the PAGE button.3In the menu setting mode, the REW, STOP, FF,SEARCH, PLAY, PAUSE/STILL and REC controlbuttons function as the PAGE, MENU-DOWN,MENU-UP, MODE, DATA–, DATA+ and SETbuttons, respectively.SET–UP MENU MAINNO.002 00 SYSTEM000 BASIC100 OPERATION200 INTERFACE400 TAPE PROTECT500 TIME CODE600 VIDEO700 AUDIOA00 MENUHow to return to the factorysettingsSet the LOCAL/MENU/REMOTE switch to theMENU position.The VTR is set to the menu setting mode, andthe menu screen is displayed on the videomonitor.1Press the RESET button.The VTR is set to the default setting mode, andthe default setting screen is displayed on thevideo monitor.2SELECT MODE2 0 ESCAPE1 LOAD2 SAVE3 PROTECT